Mastervolt solar

Soladin 600 (NL version)

Soladin 600 (NL version)

The sun as power station

Solar technology enables us to use renewable power sources such as the sun to an increasing extent. With the development of the Soladin 600, Mastervolt has made it possible for smaller solar installations, consisting of just a few panels, to contribute to a durable energy provision.

Working principle of the Soladin 600

The most important functionality of the Soladin is converting direct current, generated by the solar panels, into a standard 230 V/50 Hz electric power. The Soladin uses the electricity grid as an energy reservoir to which generated energy is sold back. In case the electricity provision is cut off, the Soladin will automatically shut down.

Plug & play

The Soladin 600 converter is very compact and equipped with easily accessible 230 V and DC connections. MultiContact connections have been included for the positive and negative connection of the PV array. The plug can be connected to a socket connection and makes the system ready to use. A clear LED indication gives information about the energy produced, the status of the system, and the Soladin converter.

Dynamic MPP tracker

Solar panels have a certain voltage at which they supply maximum energy: the so-called ‘maximum power point’ (MPP). This point varies in any make and kind of panel, and is determined by a combination of voltage, current, irradiation and temperature. The Soladin 600 is equipped with a dynamic MPP tracker, which makes it possible to reach > 99% MPP output under virtually any circumstances. The Soladin 600 therefore does not have any restrictions with regards to connecting any kind of solar panel (silicum, amorf, etc.) and always provides optimum performance of your solar system.

Entry range

The Soladin 600 has a wide working area and this makes it possible to connect almost all systems up to 700 Wp. With a max. voltage of 155 V DC, configurations of 36, 54 as well as 72 cells can be connected to it. The current range from 0 to 8 A making the Soladin 600 suitable for the latest high power panels.

  • Products developed for countries where an ENS circuit is not required. 
  • Fitted with QNS anti-islanding as standard.

Product code: 130000600

Downloads

Brochures

Soladin 600 (NL version)

Veelgestelde vragen over de Soladin 600

Brochures

Soladin 600 (NL version)

Soladin 600 solar inverter

Brochures

Soladin 600 (NL version)

Solar Image Brochure (general)

Brochures

Soladin 600 (NL version)

consumer leaflet domestic market

Brochures

Soladin 600 (NL version)

solar Monitoring

Certificates

Soladin 600 (NL version)

Suitability of thin film PV modules

Certificates

Soladin 600 (NL version)


Drawings (dimensions)

Soladin 600 (NL version)

Dimensions Soladin 600

User manuals

Soladin 600 (NL version)

User's manual Soladin 600 (English, Ned...

Product notifications

Soladin 600 (NL version)

Soladin 600 and modern panels

Product notifications

Soladin 600 (NL version)

Functional grounding information bulleti...

Software

Soladin 600 & Windmaster 500 Wizard

Software

SysCalc PV design software

3D product drawings

3D-drawing Soladin 600 (incl. mounting b...

Product image

Soladin 600 (NL version)

Small »
Medium »
Large »

Specifications

  General specifications  
 
  Operating temperature

0 °C to 40 °C
32 to 104 °F

  Enclosure

plastic (ABS)

  Protection degree

IP20

  Relative humidity

max. 85%; non condensing

  Safety class

class II

  Dimensions, hxwxd

365x143x76 mm
14.4 x 5.6 x 3.0 inches

  Weight

2 kg
4.4 pounds

  Product warranty

5 years

 
  Grid output (AC) specifications  
 
  Grid voltage

230 V (184-265 V, programmable)

  Max. output current

2,25 A

  Frequency

49,8-50,2 Hz

  Power factor

0,99

  Standby power

< 0,05 W

  EU efficiency

91 %

  Max. efficiency

93 %

  AC connection

Euro socket

  Fuse

3.15 A slow

 
  Regulations & directives  
 
  CE conformity

yes

  Nat. grid requirements

EMC89/336/EEG; EN50081-1; EN61000-3-2; EN50082-2; LV73/23/EEC; EN60950; EN62109-1

 
  Communication & monitoring  
 
  Display

two LED’s: yellow and red; correct working = yellow (speed of flashing is in relation to the power generated); malfunction = red (6 different flashing codes)

 
  Safety regulations  
 
  Island protection

monitoring of voltage and frequency frame, disconnects within 100 ms

  Temperature protection

reducing the power in case of a higher temperature of the converter; will disconnect > 80 ºC

  Protection of peak capacity

automatic control, dependent on the temperature of the converter, by raising the Vmpp; it is impossible to damage the converter with too much power

  DC polarity protection

DC connection is protected (MC connectors can be damaged)

 
  Solar input (DC) specifications  
 
  Max. input power

600 W

  PV power range

160-700 Wp

  Nom. input power

535 W

  Start-up power

1 W

  MPP voltage range at nom. power

45-125 V

  Max. voltage

155 V

  Number of inputs

1x MultiContact 4mm²

  Number of MPP trackers

dynamic MPP tracker

  Nom. input current

8 A

 
 

Accessories

PC-Link Soladin 600

View product »

Masterlog

View product »

SunWatch 25

View product »